Lithium ion batteries are a wondrous invention that are lightweight and long lasting. But it's infuriating when the battery won't recharge. You stick the battery in the charger and ... nothing. Guess what? You can fix these batteries that appear to be completely dead. Read on ...
This post is NOT sponsored by Ryobi. They do not approve of or endorse this method for fixing a Ryobi battery. AT all. 6v Li Ion Battery
Jump straight to the tutorial and how to video.
One of two things are going to happen as you read this post. You will either unfollow me due to my pathological boringness or ... you will propose marriage. So get ready to act accordingly.
If you have any sort of cordless power tool, but especially one powered by a Ryobi 18V battery, you have no doubt encountered the dreaded flashing red charger light.
And if you haven't ... you will.
It inevitably goes like this - you run to the basement to grab your cordless drill because after 10 years of thinking about it, you're finally going to build that 4 level, Tudor style treehouse with kitchenette.
Or you're going to hang a picture. (I can teach you how to hang a picture too)
Either way you put your battery in the charger and all you get is a flashing red light, which according to the label on the charger means your battery is defective. It isn't just dead. It's "defective".
I'm here to tell you it isn't. You probably left it in the charger too long which drains the battery.
Your battery is fine. It just needs a little boost.
This is where you want to go if you're looking for how to boost a car battery.
You heard me right. You do NOT have to buy a new $50 battery. You do not have to call the company and swear at them because this stupid "defective" battery is only 2 weeks old. (although by all means feel free to do so) You do not have to wait until they ship you a replacement battery to finish your project. You can get that battery up and working in about 5 minutes.
NOTE: First try pulse charging.
Pulse charge your battery by plugging and unplugging your charger (with the battery in it) for 10 seconds. Try this a few times. If it doesn't correct the problem, continue on with this tutorial.
Note: If you aren't used to doing this sort of thing, or using things like a "multimeter" this is going to seem crazy hard and way out of your DIY league. It isn't.
Step 1. Cut the end off of your AC adapter. That's right. Just cut it off. It's for a 10 year old cell phone, you're never going to use it again anyway. It's frankly kind of weird that you saved it to begin with.
Step 2. Separate and strip off 1" of each wire. You have *just* made booster cables! Good for you.
Black wire = negative Striped or solid white wire = positive
IT IS VERY IMPORTANT TO NOT MIX THE TWO UP.
Step 3. Remove the screws holding the battery together.
For Ryobi batteries it's a star shaped screw head like the one below.
A few years ago I bought a kit of small screwdriver heads from Amazon that has every small, weird, head you'd ever need.
There's a hidden screw under a piece of plastic. You need to pry the plastic off to get at the screw underneath. I used a very thin screwdriver to pry it off.
Step 4. Pull the top off of the battery case.
Step 5. Remove the 2 plastic side pieces. They're the things you press in to remove your battery from your drill.
Step 6. Lift the battery pack out.
Step 7. Set the Multimeter to read volts. For testing an 18 volt battery choose the 20 volts setting. This will give you the most accurate reading. (If you don't have a multimeter skip to Step 9 and hope for the best)
Volts are symbolized by a "V" with one or two straight lines over it on a multimeter so it's that section of the multimeter that you use. The section under the V with the straight line(s). Not the squiggly line. The straight line.
Step 8. Touching the red probe to the positive (red) terminal and the black probe to the negative (black) terminal, read the voltage shown on the multimeter. In my case the battery was carrying a charge of 0.06 volts. Which is *almost* nothing, but not completely nothing.
Step 9. Plug your AC adapter in and using the wires, boost your dead battery. Just touch the black wire to the negative terminal (the one with the black wire going to it) and the white wire (or striped wire) to the positive terminal (the one with the red wire going to it). Do this on and off for approximately a minute.
Apparently lithium ion batteries should be "pulse" charged. Which means you hold your wires down for 15 seconds or so, then release them. Then hold them down again. Over and over.
DOUBLE CHECK THAT YOU ARE TOUCHING POSITIVE TO POSITIVE AND NEGATIVE TO NEGATIVE.
Step 10. Test your the voltage on your battery pack again. It should be higher than it was before boosting. (Again, if you don't have a multimeter don't worry about this - you'll just have to press on without one)
Mine went from 0.06 volts to 7.58 volts after a minute long boosting session.
Step 11. Put the plastic cover back on the battery pack (just the part that goes into the charger) and set your battery on the charger to see if it will take a charge.
If you still only get a red flashing light and the battery won't charge, boost the battery some more. I find the battery charger will recognize that the battery is good again when you boost it to between 10 and 14 volts.
Just keep repeating the "pulse" boosting and testing the battery until it will finally be recognized by the charger and you get the green light.
To those of you who found this subject matter to be on par with spending 3 hours in a waiting room, sorry 'bout that.
For the rest of you? I know exactly how you feel. I felt the same way. Let me know exactly how elated you were after you brought your first battery back to life in the comments section.
Here's a 3 minute tutorial video showing me as I fix my own battery.
Please direct marriage proposals to my publicist. A certain tool company is *not* interested in proposing marriage to me. So I'd like to make a point of saying I love these tools and use them all the time. Their batteries and chargers on the other hand, could use some improvement.
OTHER WAYS TO FIX THINGS.
Seeing as you're the sort of person to make it all the way down here to the end of this post, you might like to learn how to install a battery operated electric fence around a home vegetable garden.
*Proceed with caution and follow instructions exactly. Failing to do so could lead to injury.*
add 5 mega ohm resistors in parallel inline on the balance charge wire so it will never allow it below it's threshold of no return or as others know it as the Ryobi black hole of death also in the upside toward charger add a 5 uf capacitor on capacitor the longer wire is positive so be sure to put this in contact with the resistor you just added if needed add a wire to the capacitors ground side with a soldered connection then find anything ground in the batter pack or just usie the battery ground seal everything up with the 3.1 0r 4.1 with adhesive inside use a hair dryer and seal up shrink wrap and waaaalaaaa these 2 items are about 5 bucks on eBay
Will this work on Ni Cad batteries
Hi Jeff, I can only recommend this with a Ryobi battery like the one shown because that's the only one I've tested it for. ~ karen!
SHUT UP!!?!?!! I can not believe that I just fixed our lithium battery on our hedge trimmers! I have found so many useful things on your website over the years but this just really blows me away! I will think lovely thoughts about you every time I use the trimmers from now on. THANK YOU SO MUCH!!!
You're welcome!!!! Isn't it fun when things on the Internet are true? 🤣 Which method did you use? The take it apart or the plug and unplug? ~ karen!
I have this wonderful (not) battery for my Ryobi misting fan and when I try to charge the battery it just stays on the blinking green “evaluate” stage for hours, even days. Would this be a solution for that situation as well?
Thank you so much! I used this technique to try to save my Lithium battery for my Hoover vacuum and it worked! At first, I only had an adaptor with 7.5V (which did nothing) but once I got my hands on a 12V it worked like a charm!
Thanks for the rating and comment Liz. I'm gad it worked! ~ karen
i have three ryobi batteries thats holding only half the charge when i’m charging them. Even one of the battery is brand new and came together with the charger. i tried the boost, all those tricks that was said in the internet, but nothing to solve my problem. untiI decided to buy another charger. I bought a ryobi charger that can charge both lithium and nicad batteries. And place one battery at a time… Problem solved! all of them are fully charged.
Would this process apply to Dewalt 18 V batteries
Wow really cool!! Thank you Karen!! Do you know what the limits of a lithium battery are? When do they explode? How does one know when they are too old to use? Do they start showing signs? I admit to being petrified of this and have even declined using solar lights because their storage battery is lithium ion. Thanks 🙏
Is there a way to do that with a 12v battery? I tried opening mine up hoping it looked similar to the 18v. It didn’t 🙁
Hi Sandara. This demonstration is for this exact battery only. ~ karen!
What sort of 12v battery? If it's lead acid you're probably out of luck if it's failed. If it's lithium then it's the same principle as above but I find it's better to measure the individual cells first to make sure they're all equal. What the post above doesn't clarify is that they're battery was never 0.06v. The circuitry cut the battery off. Had they measured each feel individually, they wouldve been around 1.5v each. Lithium charging circuitry will cut a pack off once the cells drop below 2v each (10v for 5 cell pack - also what it doesn't tell you is that these cells can be damaged easily below 2v each especially if they're below 2v for a few weeks. Lithium cells can cause serious fires if mishandled but that doesn't mean to say the above can't be done successfully - but there's probably more thorough guides to follow...
Will this work for black and decker or dewalt batteries also?
I posted this blog entry to one of my Facebook groups and not a few guys asked if you were married!
Sadly had this happen with a Dewalt 18v drill. Came with 2 batteries and one suddenly wouldn't charge. Still using the other. Dead battery was recycled so too late for that one but not for the 2 expensive replacements I bought.
Good luck when the time comes! ~ karen
I NEED your publicists contact info. I'm positive my husband will be happy to divorce me to marry you! You are AMAZING!!! As a contractor, he is constantly throwing out batteries that will not charge anymore. It gets expensive, needless to say...
Well before he buys the engagement dressage horse (my preference), the batteries do need to be relatively new. Old batteries that have simply used up their life should be chucked out. But if they're obviously not old enough for that to happen, then this will work. And I have no preference for horse colour but I do have a fondness for any of the German warmbloods. ~ karen!
Wow. I've never seen your men fans jump in to any article to comment like what was done on this one. Mansplaining to the 1,000th degree. None of the tutorials from the YEARS I've been following Karen have blown me up or caused a fire. A little respect for the intellect gents.
I wouldn't be too dismissive of any advice regarding lithium safety. I've boosted batteries with success in the past but I wouldn't do it with high current devices such as ebikes and power tools. I've seen a lithium battery go into thermal runaway and it's pretty dangerous. If it occurs inside a house it could be deadly, but 9/10 it'll probably be ok - it's the 1/10 that's the problem - and it probably won't be while charging, it'll be while in use when the current draw is at its highest.
Use it 👆 to pay me without having to pay me! LEARN MORE
My name is Karen Bertelsen and I was a television host. In Canada. Which means in terms of notoriety and wealth, I was somewhere on par with the manager of a Sunset Tan in Wisconsin.
I quit television to start a blog with the goal that I could make my living through blogging and never have to host a television show again. And it’s worked out. I’m making a living blogging. If you’re curious, this is how I do that.
So I’m doing this in reverse basically. I’m the only blogger who is trying to NOT get a TV show.
18500 Li Ion Battery Please log in again. The login page will open in a new tab. After logging in you can close it and return to this page.